How to change the rebars in the beam in Tekla Structural Designer

Tekla Structural Designer is an advanced software used for Structural Analysis and Design of a Building.In Tekla we can do detailing of steel structures as well as RCC structures we can create RCC buildings and we can insert the rebars in Tekla structures Designer software. We can also do the form works and structural drawing without the help of any other softwares .

In TSD we can do the interactive design of different members like we can change the sizes of reinforcement or change the numbers of reinforcement, how to control the sizes of members but in this we will do the Interactive Design of Beam.

Let’s follow the steps to know how to do interactive design in TSD:

Step 1

Fig.1

First of all we will open our building model and then select any member from our model then we will go to a particular construction level let’s take st.3(3) and select any beam, then we can right click on it and then we will go to our Interactive design static. Now you can see the details of the member as shown in fig.1, information like we have four spans of the beam, Section, Longitudinal Bars ,Links etc .

Step 2

Now we will go to the first span. We have the reinforcement of T16 and T12 in the top portion.so let’s see what the result will be if we change the size or number of bars. After changing you will find that its ratio changes which it indicates further be design will pass or fail .Also we can change the spacing of the links.

Step 3

Let’s check the second span. we have 2 bars and T12 at left and 4 bars and T16 at right at top of the portion, now if we change the nos of bar of right side to 2 nos and also if change the size of bar to T12 then we can see that it's sufficient for the member that member has passed.

So like this you can do the interactive design and check our structural design and using this we can make it safe.

.For more details, watch this:

Tekla Structural Designer :Interactive Design of Beams|| How to change rebar in beams.

What is TEKLA? | TEKLA Structural Designer | CIVIL CENTER

About us: Civil Center is a Civil Engineering Consultancy company which provides services ranging from Building Consultancy Services like Architectural Plan, Structural Drawing, Estimation, 3D Views of Interior and Exterior of a Building, Construction Planning and Management, and also other services like Survey Investigation Works.

We also provide Industrial Training to Civil Engineering Students as well as professionals which include courses on Building Design, Detailing Estimation, 3D Modelling and Survey by using Software like STAAD. Pro, Tekla Structural Designer, Revit Structures, Tekla Structures, MS Excel, E-Survey. In training, our goal is to make our trainees ready for the industry by getting them trained in Live Projects. We also provide placement assistance to our trainees.

To join our live classes on Tekla Structural Designer and other courses related to Civil Engineering, click here : https://forms.gle/Yy9j8BH8zZzmFfZMA

For any query

Call on: 8433248864

WhatsApp: +91 6372905201

Email: team@civilcenter.in

If you have any requirement of Building Consultancy Services like Architectural Plan, Structural Drawings etc., register using the link given below

https://forms.gle/M4MTqgcLP6ZEp4rs7

Whatsapp: +91 6372905201

Email: enquiry@civilcenter.in

Visit our Website: http://www.civilcenter.in/

You Can Find Us On Other Social Media

Visit our Facebook Page: https://www.facebook.com/civilcenter/

Visit our LinkedIn Page: https://www.linkedin.com/company/civil-center

Follow our Twitter Handle: https://twitter.com/_CivilCenter

Tekla structural Designer VS ETABS.

Tekla Structural Designer is advanced software used for Structural Analysis and Design of a Building. In Tekla, we can do the detailing of steel structures as well as RCC structures. We can create RCC buildings and we can insert the rebars in Tekla structures Designer software. We can also do the form works and structural drawing without the help of any other software. Let’s see the difference between TSD and ETABS. Step 1 As per the modelling aspects in ETABS we can import the grid lines we cannot import the shadow of an architectural drawing and in Tekla, we can import grid lines as well as the shadow of an architectural drawing assigning beams and columns is very easy and the modelling becomes quick. In ETABS we cannot see the extruded view easily but in TSD we can see the extruded view easily. Basically, visualization is easy in TSD as compared to ETABS. Step 2 In TSD load application is very easy as the dead load and live load both are almost same but in the wind...

What are TOF, SSL, & TOS in Tekla structural designer ?

Tekla structural designer (TSD) is a simple, integrated design & analysis software that gives engineers the power to analyze and design buildings efficiently and profitably. Pile foundation as two parts likely pile cap and pile, here in TSD we can design the pile cap but not the pile. TOF (Top of foundation), TOS (Top of steel), SSL (Structural slab level) are the terms in TSD software which are used while creating levels. Refer the below steps we will know about TOF , SSL & TOS : Step 1 Go to TSD software and click on construction levels, under that section you will come across the type of level being designed, likely TOF, TOS, & SSL. TOF: Top of foundation is a level which is helpful for placing foundation, plinth level and helps in excavation work identification also. TOS: Top of steel (level) takes a major part while you are working with the steel structures, composite structures or else steel structure completely, so in these cases you can mak...

Difference Between Tekla Structures and Tekla Structural Designer

NTRODUCTION: Tekla Structures and Tekla Structural Designer both are Software Developed by Trimble, some of the major differences between the two software are as Follows. 1. USAGE: The following are the primary differences between the two software based on their usage and the final product generated. TEKLA STRUCTURAL DESIGNER (TSD) is a Structural Analysis & Design Software, it is used for structural analysis and design of all structural members after the application of loads (Eg. Live Load, Dead Load, Wind Load, Seismic Load etc.) as per the standard code provisions, varying with the location of construction of building. TEKLA STRUCTURES (TS) is a Structural Detailing & Building Information Modelling (BIM) Software, it can be used for creating detailed model after we have the Structural design results. After finishing the BIM Model, a section can be cut from any Plane to generate Good For Construction Drawings (GEC) with detailing of rebar specifying the...

TEKLA STRUCTURAL DESIGNER

Search This Blog