Why do you need to get to your 3D Building Model Done before construction of your house?

Often you get to hear that your friend or colleague is making a 3D model of his/her house. Let’s know why they choose to do so. Any person prepares a 3D model of a house to know how his/her house will look after construction. While making a 3D model you can know whatever you are thinking in your mind is possible or not.

One can also make changes as many times as he wants in the 3D model of his dream house. Think of a situation when you have made your building and you don’t like that design after construction. Like that was looking good in your imagination but now that’s failing to catch your house. Now you will have just two options. Either you live with that unsatisfactory design for the rest of our life or you make changes in your already constructed house. Both these options are certainly not good. And this is where the 3D model of the house comes into play. You can also decide whether you are looking better than what’s already in your neighbourhood. Now the question is, whether choosing to make a 3D model from any architecture or consultancy firm is a wise decision or not. So, I will suggest you to go the professional way if your budget allows it. And more importantly if you want a house that looks modern and not like those houses with plain walls on all four sides.

I have saved the gem for the last. When it comes to budget then let me tell you a secret. If you will make a 3D model of your house then you will have the proper dimension of all your designs and so your mason will finish your construction work in less time and that too with more accuracy. It will also save the time for the wastage of design material. In addition to that 3D model will tell you which material you are going to use in your design. So, you can easily calculate project cost and then you can easily decide whether it is in your budget or not.

If you have any requirement of Building Consultancy Services like Architectural Plan, Structural Drawings etc., register using the link given below

https://forms.gle/M4MTqgcLP6ZEp4rs7

Whatsapp: +91 6372905201

Email: enquiry@civilcenter.in

That was all from my side. To watch how a 3D model of a house looks like you can visit https://youtu.be/Bib2KrKpJSQ

About us: Civil Center is a Civil Engineering Consultancy company which provides services ranging from Building Consultancy Services like Architectural Plan, Structural Drawing, Estimation, 3D Views of Interior and Exterior of a Building, Construction Planning and Management, and also other services like Survey Investigation Works.

We also provide industrial Training to Civil Engineering Students as well as professionals which include courses on Building Design, Detailing Estimation, 3D Modelling and Survey by using Software like STAAD. Pro, Tekla Structural Designer, Revit Structures, Tekla Structures, MS Excel, E-Survey. In training our goal is to make our trainees ready for the industry by getting them trained in Live Projects. We also provide placement assistance to our trainees.

Visit our Website: http://www.civilcenter.in/

You Can Find Us On Other Social Media

Visit our Facebook Page: https://www.facebook.com/civilcenter/

Visit our LinkedIn Page: https://www.linkedin.com/company/civil-center

Follow our Twitter Handle: https://twitter.com/_CivilCenter

Tekla structural Designer VS ETABS.

Tekla Structural Designer is advanced software used for Structural Analysis and Design of a Building. In Tekla, we can do the detailing of steel structures as well as RCC structures. We can create RCC buildings and we can insert the rebars in Tekla structures Designer software. We can also do the form works and structural drawing without the help of any other software. Let’s see the difference between TSD and ETABS. Step 1 As per the modelling aspects in ETABS we can import the grid lines we cannot import the shadow of an architectural drawing and in Tekla, we can import grid lines as well as the shadow of an architectural drawing assigning beams and columns is very easy and the modelling becomes quick. In ETABS we cannot see the extruded view easily but in TSD we can see the extruded view easily. Basically, visualization is easy in TSD as compared to ETABS. Step 2 In TSD load application is very easy as the dead load and live load both are almost same but in the wind...

STAAD Pro Vs Tekla Structural Designer .Which One Is Better ?

Tekla Structural Designer (TSD) is a simple, integrated design & analysis software that enables engineers to deliver safe, effective and rationalized design more quickly, regardless of structural material. Reinforcement drawings for the entire building or tonnes of steel for estimating and many more. So in the above image you can see the first image is created in Tekla Structural Designer (TSD) and in the second image the model has been created in Staad Pro . we can start the comparison with the grid lines. So for creating grid lines in staad we need to enter the coordinates from the beam column plan as shown in fig.1 and we need to insert it while viewing the beam column plan. Fig 1 We can create grid lines in Tekla Structural Designer directly and in addition you can also import the beam column plan as shadow as shown in fig 2 . Fig. 2 • Next step is adding members in staad pro so in addition we need to see the beam colu...

How to study the Reinforcement Drawings of beams which have been generated in TSD.

Tekla Structural Designer is advanced software used for Structural Analysis and Design of a Building. In Tekla, we can do the detailing of steel structures as well as RCC structures. We can create RCC buildings and we can insert the rebars in Tekla structures Designer software. We can also do the form works and structural drawing without the help of any other software. Let’s go step by step to learn how to study the Reinforcement Drawings of beams that have been generated in TSD. Step 1 As we can see, this building has been fully designed and analysed. Now, just right click on the beam then click on the report for the member and it will generate the report for the member and we will see this and after that, we can also check the file for the particular beam. Fig.1 Step 2 Now we have 3 numbers of sections, for each beam, it has been made and the respective cross-section is also given. Step 3 Now if we just go through the drawing, we can see that we have 2 ba...

TEKLA STRUCTURAL DESIGNER

Search This Blog